In the following guide, I will show you how to make an electric scooter with a drill. You will learn that it is not that difficult. In fact, you will need basic tools and accessories. But why would you want to undertake this project? The first reason is that you are just curious. You want to confirm that it actually works. The second reason is that you may have requested for an electric scooter but your parents said no. the third reason is that you want to save on cost since the accessory can cost quite a dime. Without wasting any more time, let us begin the project. Before you read further also check our article on How Much Is A Razor Electric Scooter Battery?
Bestseller Electric Scooter With A Drills On Amazon:
Make sure to read our article on Best 3-Wheel Electric Scooters. I am sure you will love to read it.
How to Make an Electric Scooter with a Drill?
Step 1: Gather the Necessary Tools
Before you begin, you need to have all the parts and accessories in order. Also important is drafting down a checklist. This will help you as you go a long way. A good practice is to tick or check a step after you are done with it. You will need:
- A normal kick scooter. You can also decide to create your own
- A portable electric drill
- Two cogwheels. Preferable from an old bicycle
- A bicycle chain
- Spanner/ Adjustable wrench
- Bicycle brake cables or two syringes with a connecting cable
- Water or oil if using the syringe
- Fasteners. These include self-tapping screws, bolts, nuts or zip ties/ tie-ups
NB: using an old scooter is an easier approach and more convenient. If you do not have one, you can make your own.
Step 2: Understand the Basics
Next, do you understand the basics? Know what each part does and where it will be mounted. For example, a portable drill provides the motion or power to move. The cogwheels are connected to the drill and the rear wheel. The chain transfers motion from the power drill to the rear wheel.
The throttle controls the speed and may incorporate a bicycle cable or a hydraulic system that presses the power button on the drill. A bicycle cable or two syringes connected via a tube and fluid work well.
Step 3: Attach a Gear Wheel/ Cog to the Rear Wheel
Attach the cogwheel to the rear wheels. There are many ways of doing this and it will depend on the type of the wheel. If it is the solid type, you simply need to drill holes on the cogwheel and the rim on the wheel. Thereafter you align the holes and tighten using bolts and nuts. Use three to four holes.
For spoked wheels, you will have to fasten the cogs on the spokes. Use metal fasteners. If they are large, you can drill small holes on several spokes and then use small bolts and nuts to tighten them against the cogwheel.
Step 4: Attach a Gear Wheel to the Portable Electric Drill
Next, you proceed to the portable drill. Take the other cog and attach it to the chuck or head. The method of attaching will also vary with the design and size of the drill. However, generally, it should be easy. The easiest method is inserting a large bolt into the center of the gear wheel and making certain it t is tightly secured. You can use a bolt and nut.
To connect it to the head, you simply open the jaws and then insert it. Tighten it as you would with a drill bit. Use an adjustable spanner r or wrench to make sure it is super tight.
Step 5: Install a Chain
You will need a bicycle chain to connect the two cogs together. Have it open and after ascertaining the right length, you then lock it. This entails removing a pin from one of the connectors and then re-inserting it later. It is important that it is not too tight or too loose. Too tight and to will put a lot of stress on the portable electric drill. If it is too loose, it may easily come off. You don’t want this to happen when riding as the scooter will lose momentum. It may also cause some injuries. Always pick a high quality and a not so worn chain.
Step 6: Install a Throttle
Powering the drill involves pressing a switch. However, due to its mounting location, you cannot do this while riding the scooter. You need a mechanism that allows it to be controlled from the handlebar. This should happen easily and with minimal convenience.
The first option is using the bicycle brake cable and brake lever. Depressing the lever will also depress the switch making it fun.
The other option is using two syringes connected via a pipe and filled with water. Being a hydraulic system, pressing one syringe will also activate the other. One will be on the handlebar while the other will be connected to the drill’s power button. The syringe, tubing, and cables will be harnessed to the frame using zip ties or tie-ups.
NB: This is one of the common methods. There are also other methods that will achieve the same. For instance, instead of off using the cogwheels and chain, you can simply wrap Velcro on the drill’s head/ chuck. This will create enough friction to turn the wheel when it is tightly placed against it. Although simpler, it is not as effective as the featured method. The Velcro will wear out and you will need to replace it. It will also be more affected by moisture or wetness and will tend to slip. Check Out Best Electric Scooter for Adult
Conclusion
You don’t have to spend a colossal sum of money to buy an electric scooter. You shouldn’t miss out on the fun because you didn’t have the electric-powered unit. With basic tools that are readily available in the home, you will be able to create your very own scooter. As seen in the above article, it’s not that complicated. In fact, you should be done within a short time. It is decent a piece that will have you enjoying the ride. Follow this guide on how to make an electric with a drill and have the maximum fun and sense of achievement.
Contents
Leave a Reply